EasyManua.ls Logo

FibroLAN Falcon-RX/812/G/A User Manual

FibroLAN Falcon-RX/812/G/A
333 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Falcon R-Class
User Guide
Falcon-RX
Software version 8.0.20
www.fibrolan.com

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the FibroLAN Falcon-RX/812/G/A and is the answer not in the manual?

FibroLAN Falcon-RX/812/G/A Specifications

General IconGeneral
BrandFibroLAN
ModelFalcon-RX/812/G/A
CategoryNetwork Hardware
LanguageEnglish

Summary

1 Introduction

1.1 R Class series overview

Provides an overview of the Falcon R Class series, its capabilities, and target environments.

1.2 Physical Description

Details the physical characteristics and front/back panel descriptions of the Falcon-RX model.

1.3 Models List

Lists the available Falcon-RX models and their corresponding part numbers and descriptions.

1.4 Typical Applications

Explains common use cases for the Falcon-RX, such as 5G fronthaul and IIoT campus deployments.

2 System Description

2.1 Block Diagram

Illustrates the functional block diagram of the R Class series system, showing key processing modules.

2.2 R Class series key features

Highlights the main features and capabilities of the R Class series, including timing, capacity, and QoS.

2.3 Management

Outlines the various management interfaces and protocols supported for R Class devices.

2.4 R Class Falcon port features

Describes special data-plain functions and extended traffic handling capabilities of R Class ports.

3 Getting Started

3.1 Quick Setup Outline

Provides a step-by-step procedure for the initial setup and basic configuration of R Class models.

3.2 Console Connection and Configuration

Details how to establish a console connection and perform initial IP address settings via CLI.

3.3 Web GUI

Explains how to access and navigate the Web Graphical User Interface for device configuration and monitoring.

4 Functional Description

4.1 Overview

Introduces the R Class series functionality and instructions for configuration and monitoring.

4.2 Frame Processing Overview

Describes the frame forwarding process within the R Class series, from input to output.

4.3 System Information

Covers system information configuration, including contact, name, location, and IP settings.

4.4 Ports Configuration and Monitoring

Details current port configurations and monitoring capabilities, including link states, speeds, and statistics.

4.5 MAC Learning Table

Explains the MAC learning table functionality, configuration of aging times, and static MAC table setup.

4.6 VLANs and Provider Bridges

Covers VLAN configuration, including global settings, port configurations, and provider bridge (QinQ) features.

4.7 Quality of Service (QoS)

Explains QoS mechanisms for bandwidth management, including ingress classification, egress scheduling, and policing.

4.8 Security Features

Details various security features such as user configuration, authentication methods, network security, and IP source guard.

5 Management

5.1 General Introduction

Provides an overview of R Class management methods and system information displays.

5.2 DHCP (Dynamic Host Configuration Protocol)

Explains DHCP server, snooping, relay, and pool configurations for IP address management.

5.3 Simple Network Management Protocol (SNMP)

Covers SNMP system configuration, trap settings, community configuration, and user/group management.

5.4 Supported SNMP MIBs

Lists the supported SNMP Management Information Bases for the R Class series.

5.5 Command Line Interface (CLI)

Describes how to access and use the Command Line Interface (CLI) for device management via Telnet and SSH.

5.6 Events Configuration

Allows configuration of event reporting and notification settings for various system events via SNMP, syslog, CLI, and Flash.

5.7 Web Interface

Guides on accessing and navigating the Web Interface for device management, including port and user configuration.

5.8 RMON Overview

Provides an overview of RMON statistics, history, alarm, and event configurations for network monitoring.

6 Diagnostics

6.1.1 Ping IPv4

Details how to perform ICMP PING tests for IPv4 connectivity troubleshooting.

6.1.2 Ping IPv6

Explains how to perform ICMPv6 PING tests for IPv6 connectivity troubleshooting.

6.1.3 Link OAM MIB Retrieval

Describes the procedure to retrieve local or remote OAM MIB variable data for link monitoring.

6.1.4 VeriPHY Cable Diagnostics

Guides on running VeriPHY Cable Diagnostics for copper ports to check cable status and identify issues.

7 Maintenance

7.1 Restart Device

Provides instructions on how to restart the switch to restore normal operation.

7.2 Factory Defaults

Explains how to reset the switch configuration to factory defaults, retaining IP settings.

7.3 Software Management

Covers firmware updates, including software image selection and the upgrade process.

7.4 Configuration Management

Details managing switch configurations, including saving, downloading, uploading, activating, and deleting.

7.5 Power Supply Overview

Provides information on power supply requirements, AC and DC connections, and safety precautions.

7.6 Laser Safety

Outlines essential safety rules and precautions for handling fiber optic ports and laser products.

8 Warranty Information

8.1 Warranty Limitation

Details the warranty period, obligations, and conditions for repairs or replacements.

9 Glossary of Terms

9.1 General Glossary of Terms

Provides a general glossary of technical terms and acronyms.

9.2 General Glossary of Terms

Continues the general glossary of technical terms and acronyms.

9.3 Alphabetical Glossary of Terms

Provides an alphabetical listing of technical terms and their corresponding definitions.

Related product manuals