FibroPool FH235-I - Page 4

I. Included Parts and Accessories
Each unit includes the following accessories:
No. Name Qty. Use
1 Instrucon Manual 1 PC Safety and installaon manual (this document)
2 Drain-hose 1 PC Used to direct condensaon away from the unit
3 Drain-hose adapter 1 PC Connects the unit to the drain hose
4 Rubber shock absorber 4 PCS Limits fricon with installaon locaon
5 Heat pump unit 1 SET Heats and cools water pumped through
6 Unions 2 SET Connects the heat pump to 1.5” PVC
The heat pump requires the following components:
No. Name Qty. use
1 Pool pump 1 Moves water through the system
2 Filter system 1 Prevents debris from reaching the unit
3 Plumbing 1 Connect the equipment and make circulaon
NOTE
The exact amount and setup of the plumbing, valves, $lter equipment, sterilizing equipment, etc. vary
from one pool to another. At minimum, a pool pump and $lter are required.
It is not recommended to install auxiliary electric heaters in the system. If absolutely necessary,
auxiliary heaters must be installed and operated by quali$ed technicians. Fibropool cannot provide
support for auxiliary hea"ng systems.
Heat Pump Overview