FICEP 1001 DFB - 2.1.2 Working Units; 2.1.3 Drilling Uint

FEATURES
Page 2-4
1001 DFB
Drilling & Sawing Line
FICEP
2.1.2 Working Units
2.1.3 Drilling Uint
No. of drill heads
1
- Monospindle mitering drill head
- Drill head positioning angles
-90°/0°/+90°
Max. drilling diameter
- with tapered adaptor No.4
40 (50)mm.
Max. thickness that can be drilled
100 mm.
Spindle rotation motor per head (a.c.)
15 kW
Spindle R.P.M. (with continuous adjustment by program)
Spindle drill feed rate
RPM 180 – 2500
mm/min 40 – 1000
Spindle fast approach/return speed
mt/min 15
Positioning stroke to suit the gauge line :
- flanges
- 10 to 450 mm.
- web
- 20 to 995 mm.
TOOL CHANGE
- number of tools change devices
n. 1
- number of tools to be changed each
n. 6
- adaptor size
ISO 45
Electronic device for zero reference setting (top side)
Device for the automatic zero reference setting of the drill spindle gaugeline when the head
is horizontally positioned to the web axis.
The device consists in one button (probe sensing unit) that survey the position of the web
top side and the flange height.
Device for "SCRIBING" operations
Device for automatic scribing operations through drilling unit. This device is supplied with
a special tool and a self-adapting system, which is automatically adjusted according to the
material deformation. The supply also includes all necessary software-hardware
implementations.