Need help?Do you have a question about the Fidelity Measurement AFM18 and is the answer not in the manual?
General| Brand | Fidelity Measurement |
|---|---|
| Model | AFM18 |
| Category | Accessories |
| Language | English |
Details on the instrument's keys, display indicators, symbols, and their functions.
Diagrams and descriptions of all instrument connection ports (DC Jack, Load Cell, RS232, TTL).
Important safety and operational warnings for using the instrument.
Information on the built-in battery, initial charging, and power adaptor usage.
Guides for connecting load cells, computers, printers, and other peripherals.
Instructions on setting preferred operation parameters using the internal function table.
Overview of internal settings and parameter adjustments available through internal functions.
Step-by-step guide to enter and select desired internal functions and parameters.
Explanation of key functions available within internal function mode for navigation and saving.
Detailed table of internal functions, parameters, notes, and default settings.
Procedure for powering on, starting weighing, and platform placement.
Information on supported weight units (kg, g, lb) and conversion methods.
Methods for taring off container weight: Manual, Auto (F12), Repeated (F13), Preset (F63).
Functionality for accumulating and recalling transaction data to memory.
Overview of instrument modes: Piece Count, Percentage, Animal Weighing, Checkweighing.
Steps to enter and exit supplementary function modes like Piece Count and Percentage.
Guide to enter and use the Piece Count function, including sampling process.
Instructions for entering and using the Percentage function, including reference mass setup.
Guide to enter and use the Animal Weighing function, including error and filter controls.
Overview and activation of Checkweighing modes (Mode 1 & 2).
Using Standard/Dynamic Checkweighing (F25=Mode 1) with Hi/Lo limits and Near Zero Value.
Using Inflow/Outflow control logic (F25=Mode 2) with relay output assignments.
Configuring and operating Constant Feeding (Mode 3) and Dispensing (Mode 4) modes.
Detailed explanation of Constant Feeding mode, including sequence and auto printout.
Detailed explanation of Constant Dispensing mode, including sequence and auto printout.
Data format for RS232 transmission in ASCII code.
Illustrations of standard ticket/receipt printouts for various function modes.
Information and steps for creating custom print output formats.
Available label format groups and their corresponding file names.
Information on prompt commands and samples for label programming.
Symbols indicating battery power levels and estimated operation time with/without backlight.
Instructions for recharging the battery and indicators for charging status.
How to select the incoming command comport (RS232/TTL) using jumper settings.
Direct control commands for panel keys, sent from a computer via communication programs.
Commands to request operational data (status, weight, date, etc.) from the instrument.
Table of information request commands, operation data, and corresponding data length.
Protocol and format for data answered by the instrument, including motion status and weight values.
To Next Page
