Fidella FUSION - Adjust Your Baby Carrier

ADJUST YOUR BABY CARRIER
EN
13
Adjustment of the
bridge
Place your baby on a
comfortable surface.
The legs should be in
a squat position. Now
measure the distance
from the hollow of one
knee to the hollow of the
other knee with a tape
measure. Set the bridge
to the measured bridge
width.
For babies who are not able to sit unassisted fasten the
shoulder straps on the waist belt with the lower buckle.
For children who are able to sit unassisted fasten the shoulder
straps for better weight distribution on the upper buckle.
Adjusting
the back section
Turn your baby on
its side a little bit.
Measure the distance
from the edge of the
cup to the shoulder.
Adjust the height of
the back panel to the
measured height.
1 2
1
2
Push the sternum
strap as far down
as possible.