Need help?Do you have a question about the Field Scout SC 900 and is the answer not in the manual?
General| Category | Measuring Instruments |
|---|---|
| Measurement Type | Soil Compaction |
| Display | LCD |
| Data Logging | Yes |
| Tip Diameter | 0.5 in (1.27 cm) |
| Units | PSI, kPa |
| Resolution | 1 psi |
| Model | Field Scout SC 900 |
| Shaft Length | 30 in (76 cm) |
| Dimensions | 40 x 6 x 4 in (101.6 x 15.2 x 10.2 cm) |
Recommends optimal times for taking measurements based on soil moisture conditions.
Guides users on choosing the appropriate cone tip size for different soil types.
Describes the steps to turn the meter on and the initial startup screens displayed.
Explains how to delete the most recently recorded measurement profile.
Details how to access and review previously taken compaction measurement data.
Outlines the process of inserting the probe and recording a complete soil compaction profile.
Explains how to connect a GPS unit to geo-reference collected data.
Describes the hardware and software steps for linking the meter to a personal computer.
Details the necessary cables and their connections for GPS unit integration.
Specifies the required NMEA 0183 settings for the GPS unit to communicate with the meter.
Provides step-by-step instructions for recalibrating the meter's load cell.
Details the process of accessing and replacing the meter's batteries.
Explains how to select the correct communication port within the software interface.
Guides users on selecting the appropriate meter type in the software for proper operation.
Explains how to assign a name to the meter for data file identification.
Covers enabling the datalogger and configuring GPS recording options.
Describes how to set the display and recording units for cone index and depth.
Details common error messages encountered during operation and their causes.
Explains the meaning of the low battery warning and its resolution.
Explains how to use the depth target for checking cone diameter and proper fit.
Describes the method for measuring cone diameter using precision instruments.
Provides step-by-step instructions for physically replacing the worn cone tip.
To Next Page
