Need help?Do you have a question about the Field Scout TDR 350 and is the answer not in the manual?
Overview of the meter's buttons and their primary functions.
Details the process of inserting rods and taking measurements for accuracy.
Instructions for transferring data from the meter to a USB flash drive.
Defines VWC and related concepts like Saturation, Field Capacity, and PWP.
Explains the TDR principle for measuring VWC based on dielectric permittivity.
Procedure to check meter operation without rods attached.
Procedure to verify readings with rods in air, water, and sand.
Overview of the meter's buttons and their primary functions.
Details the process of inserting rods and taking measurements for accuracy.
Instructions for transferring data from the meter to a USB flash drive.
Defines VWC and related concepts like Saturation, Field Capacity, and PWP.
Explains the TDR principle for measuring VWC based on dielectric permittivity.
Procedure to check meter operation without rods attached.
Procedure to verify readings with rods in air, water, and sand.
General| Display | LCD |
|---|---|
| Soil Measurement | Volumetric Water Content (VWC) and Electrical Conductivity (EC) |
| Measurement Range (Water Content) | 0 to saturation |
| VWC Range | 0 to saturation |
| Accuracy (Water Content) | ±3% |
| VWC Accuracy | ±3% |
| Measurement Range (Conductivity) | 0 to 5.0 dS/m |
| EC Range | 0 to 5.0 dS/m |
| Accuracy (Conductivity) | ±10% or 100 µS/cm, whichever is greater |
| EC Accuracy | ±10% or 100 µS/cm, whichever is greater |
| Soil Temperature Range | -10°C to 60°C |
| Data Logging | Yes |
| Power Supply | Battery |
| Weight | 0.5 kg |
| Soil Temperature Accuracy | ±1 °F (±0.5 °C) |
To Next Page
