Field Tuff FTF-01FH User Manual

Important Safety Information
Read and understand all safety precautions and
instructions before use.
 The universal Fast Hitch System is designed for
Cat 1 and Cat 2-- 3 point hitches.
 Check universal Fast Hitch System before each
and every use for signs of wear. Do not use if
damaged or if not working properly.
 The universal Fast Hitch System is designed to
be used by adults only.
 Keep children away from tractors and
implements.
Instructions:
1. Determine the category of hitch you have on your tractor. Fast Hitch includes bushings to adapt
category 1 hitch arms. Fast Hitch includes bushings to adapt category 1 implements to category 2.
2. Attach the main body of the fast hitch to 3 pt. arms by using bolt # 4 and nut # 14 and tighten
securely.
3. Center the hitch by using bolt # 10 on top and bolt # 15 on the bottom along with jamb nut # 11 and
secure. Tighten jamb nut after adjustment.
4. Use 3 each of bolt # 2 and jamb nut # 3 for each side of the hitch assembly. Tighten the bolts
against the hitch arm assembly so the Fast Hitch is tight against the 3 point arms. Tighten jamb nuts.
5. Hook strap # 20 to each side of the Fast Hitch to keep lift arms together.
6. Back up your tractor to the implement and lift the 3 point arms. The spring loaded toggle should
trap the pins of your implement. Make sure you have the proper pin size for the Fast Hitch so there
is no play between the pins and Fast Hitch opening. Bushings are supplied if you need to adapt to
Category 2. Secure top link and you are ready to use your Fast Hitch.
7. Check to make sure bolts and jamb nut are tight after 15 minutes of use. After checking the first
time, complete the same process every hour.
8. To unhook your implement, hook the cable lanyard to the rod from the spring loaded toggle.
Unhook your top link and lower the 3 pt. arms. Drive away from your implement slowly.
Universal Fast Hitch System for 3 point Hitches Model #: FTF-01FH

Field Tuff FTF-01FH Specifications

General

Product Type	Field Harrow
Model	FTF-01FH
Tine Material	Steel
Frame Material	Steel
Color	Black
Working Width	4 feet
Transport Width	4 ft

Summary

Universal Fast Hitch System Safety

General Safety Precautions

Understand all safety precautions and instructions before use. Use by adults only. Keep children away.

Universal Fast Hitch System Instructions

Hitch Category Determination

Determine your tractor's hitch category and use bushings for adapters.

Attaching the Hitch

Attach the main body to 3-pt arms using bolts and nuts. Center the hitch.

Securing Hitch Arms

Use bolts and jamb nuts to secure the hitch tightly against 3-point arms.

Lift Arm Strap

Connect strap to each side of the Fast Hitch to keep lift arms together.

Connecting to Implement

Back up to implement, lift arms. Ensure correct pin size for secure fit.

Post-Use Checks

Check bolt and jamb nut tightness after 15 minutes and then hourly.

Unhooking Implement

Use cable lanyard to release toggle. Unhook top link and lower arms.

Fast Hitch Parts Identification

Component List

Detailed list of part numbers, descriptions, and quantities for the Fast Hitch system.

Category Pin Size Chart

Information on lift arm, implement, and top link pin sizes for different hitch categories.

Product Warning and Contact

Manufacturer Liability Disclaimer

BAC Industries and Field Tuff not liable for damages due to misuse. Read all warnings.

Safety Gear Recommendation

Always wear safety glasses, protective clothing, and proper foot protection.

Contact Information

Contact BAC Industries for questions. PO Box 155, Miltona, MN 56354. Phone 218-943-6290.