FDU 2004-E
Instruction after use
1. Turn off the
switch
“o” for turn off
“-”for turn on
2.
3.Take off the hose and floor
brush, clean the rest dust
4.Take off the head as the
picture
6.Clean the tank and dry
with a soft cloth
5.Take off the filter, wash and
dry it for next
use
Protective Device
Special instruction of the protective device
When tank is full of water, the device will raise up,
suctionpower will stop and abnormal noise indicate that
themotor is running at a high speed. If this happened,
youshould cut off the power, and pour away the water.
Return on the power, it will begin to work normally
again.
When vacuum cleaner overturn or shaking, the device
works, you should cut off the power and make it upright,
then turn on the machine again.
When tank is full of water, the device will raise up, suction power will cut off, please stop the working
immediately.
Raising of
water level
Pull out the plug and put
the wire in order
EN
%
To Next Page
Loading...
