Machine description and items delivered | Electric hedge trimmer application
3. MACHINE DESCRIPTION AND ITEMS
DELIVERED
Machine Description (See fig. 1)
Items Delivered
Remove all contents from the box and inspect to ensure no damage was incurred during
shipping, and that the items listed below are included.:
Electric hedge trimmer
Blade safeguard
Instruction Manual
Warranty card
Should the components be missing or damaged, contact the dealer of the machine.
4. ELECTRIC HEDGE TRIMMER
APPLICATION
Appropriate Application
The electric hedge trimmer is intended for cutting hedges, shrubs and low-lying plants in
private domestic gardens and allotments. Appropriate application of the electric hedge
trimmer is conditioned by keeping of the instructions mentioned in the Instruction Manual.
WARNING! Risk of injury! Do not use the electric hedge trimmer to mow grass/lawn edges,
or to cut the organic material for composting.
Blade scabbard
Cutting blade
Protective guard
Front handle with switch
Rear handle with switch
Power cord holder
Power cord and plug
Cover fixing bolt
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
7
USER‘S MANUALELECTRIC HEDGE TRIMMER
ENSafety instructions
5. SAFETY INSTRUCTIONS
WARNING! For safety reasons, children under the age of 16 and people not familiar with
these operating instructions must not use the electric hedge trimmer. Persons with reduced
physical or mental abilities may use the electric hedge trimmer only if they are supervised or
instructed by a responsible person.
WARNING! If not used properly, this product can be dangerous. The warnings and safety
instructions must be followed to ensure reasonable safety and efficiency in using the product.
The operator is responsible for following the warnings and instructions in the Instruction
Manual and on the product. Never use the product unless the guards provided by the
manufacturer are in the correct position.
Wear the appropriate eye protection.
General warnings on the electric tool safety.
WARNING! Read all the safety warnings and instructions carefully.
WARNING! Failure to follow all instructions listed below may result in electric shock, fire
and/or serious injury.
WARNING! Save all warnings and instructions for future reference.
WARNING! The term “electric tool” in the warnings refers to your mains operated (corded)
electric tool or battery-operated (cordless) electric tool.
Work Area Safety
Keep the work area clean and well lit.
Cluttered or dark areas invite accidents.
Do not operate electric tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust.
Electric tools create sparks which may ignite the dust or fumes.
Keep children and bystanders away while operating an electric tool.
Distractions can cause you to lose control of the equipment.
Electrical Safety
Electric tool plug must match the mains outlet. Never modify the plug in any way. Do not use
any adaptor plugs with earthed (grounded) electric tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric shock if your body is earthed or grounded.
Do not expose power tools to rain or wet conditions.
To Next Page
Loading...
