EasyManua.ls Logo

Fieldmann FZN 2002-E - STORAGE; MAINTENANCE; Cleaning the Electric Hedge Trimmer

Fieldmann FZN 2002-E
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
FZN 2002-E
EN Working positions | Storage | Maintenance
WARNING! Risk of injury! If the hedge trimmer does not switch off automatically, there is
a risk of lacerations. Never override the safety devices (e.g. by strapping down one of the start
buttons).
Starting the Electric Hedge Trimmer (Fig. 11, 19)
The hedge trimmer is fitted with a two-handed safety device (2 trigger buttons) to prevent the
unit from being turned on by accident.
Remove the safeguard 8 from blades 9.
Hold the guide handle 4 with one hand and press the trigger 5 on the guide handle or hold the
handle 3 in one hand and press the trigger 15.
Hold the handle 3 with the other hand and press the trigger 14. The electric hedge trimmer
will start.
Switching the electrical hedge trimmer off:
Release the trigger 14 and the secondary trigger 5 on the guide handle, or release both
triggers 14 and 15.
Slide the safeguard 8 over the cutter blades 9.
10. STORAGE (Fig. 6)
Store the electric hedge trimmer out of the reach of children.
Disconnect mains plug.
Clean the hedge trimmer and slide the safeguard 9 over the cutter blades 8.
Store the hedge trimmer in a dry, frost-free place.
11. MAINTENANCE (Fig. 6)
Cleaning the Electric Hedge Trimmer
WARNING! Danger of injury/electric shock! Prior to maintenance, always unplug the mains
plug and slide the safeguard 8 over the cutter blades 9.
Clean the electric hedge trimmer with a damp cloth.
Grease the cutter blades 9 with low-viscosity oil.
Avoid contact of oil with the plastic components of the electric hedge trimmer.

Related product manuals