EN 14
FZN 70205-0
Technical data | Cleaning and maintenance
8. TECHNICAL DATA
Item number FZN 70205-0
Rated voltage 20 V
Stroke rate 1300 RPM
Cutting diameter 16 mm
Operational time 25 min (2Ah), 50 min (4Ah)
Electronic brake yes
Bar lenght 510 mm
ACCESSORIES
Item number Accessory
FDUZ 79020 Battery pack 2 Ah
FDUZ 79040 Battery pack 4 Ah
FDUZ 79100 Fast charger
FDUZ 79110 Fast dual charger
9. CLEANING AND MAINTENANCE
DANGER!
Risk of Injury! Before any maintenance or cleaning work:
Remove the battery.
Let the device cool down.
Overview of cleaning
If necessary
What? How?
Clean the machine
Cleaning the machine section Oil cutting tool Clean cutting tool with brush.
Then, spray oil on all sides of the cutting tool.
Cleaning the machine
Remove any coarse dirt.
Wipe the appliance with a slightly damp cloth.
To Next Page
Loading...
