Do you have a question about the Fieldpiece SR47 and is the answer not in the manual?
Brand | Fieldpiece |
---|---|
Model | SR47 |
Category | Scales |
Language | English |
Clean the exterior with a damp cloth only. Avoid detergents or solvents.
Replace batteries when the indicator is empty. Remove rear battery cover.
Press for 1 second to power the platform on or off.
Press for 1 second to power remote on/off. Tap for backlight.
Press for 1 second to tare the tank for charging or recovering refrigerant.
Press for 1 second to zero the scale with no weight on the platform.
Tap to change units. Press for 1 second to search for platforms.
Measure refrigerant tanks up to 252 lbs. Place platform on solid, level ground.
Tap to turn on the blue backlight for the LCD. Useful in dark situations.
Re-sync remote display to platform if needed. Can sync two displays to one platform.
Link SR47 to Job Link app or SMAN manifold for use as a display.
Use hoses with ball valves or low-loss fittings to minimize refrigerant gas release.
Connect hoses before zeroing. Note weight before removing hoses after charge/recovery.
Adjust G-Value based on altitude/location for accurate readings. Examples provided.
One-year warranty against defects in material or workmanship.
Contact local distributors for warranty service for products purchased outside the U.S.
Equipment tested and complies with FCC Part 15 Class B limits for interference.
Complies with FCC RF radiation exposure limits; minimum 0.5 cm separation required.
Complies with IC RSS-102 radiation exposure limits; minimum 0.5 cm separation required.