⑤ Adjust the angle of the handlebar upturn, the default angle is 0°; you can adjust it to fit your riding habit;
(Check if the direction of the handlebar and the front wheel can be aligned, if not,you can loosen the 2 screws on the
side of the handlebar to adjust.)
⑥ Install the handlebar wire: Follow the color of cable connector, and align the connector arrow
direction to access the handlebar.
（Caution:The screws should be tightened to keep safe.）
Install the front wheel
① Unscrew the nut and spring of the front wheel
quick release.
② Lift the front part of the bike, align the front
wheel and insert the front fork sleeve ring.
5
6
8
To Next Page
Loading...
