① Use the Allen key to remove the counter
-locking screws from the stem.
2.1 Installation guide
lnstall the handlebar
Most parts of the bike had been installed from the factory. But please install the handlebar.baskets,headlight, front wheel,
fenders,pedals and adjust the saddle before riding.
② Remove the handlebars and adjust the position to
make the brake levers align with the direction of the
front wheels.
④ Lock the counter-locking screws and use an Allen screw tool
to lock it safely.
③ Insert the handlebar into the stem
holes and align with the risers.
1
3
4
2
7
To Next Page
Loading...
