EasyManua.ls Logo

Fiilex P3 COLOR - User Manual

Fiilex P3 COLOR
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1. 4 Leaf Barndoor
2. V-Mount
3. Barndoor Slot
4. Accessory Lock
5. Barndoor Holder
6. Side Air Vents
7. Yoke Knob
8. DMX Cable
9. USB Type-C Port
(For updating firmware & 5V/1A)
10. Accessory Lock Release
11. Intensity Control Knob
12. OLED Display
13. Menu Knob
14. Light Control Output Jack
15. DC Power Input Jack
16. ON/OFF Button
17. Light Stand Adapter
18. Power Adapter
19. Yoke
• DO NOT look into the light source. Be cautious of the high-intensity beam.
• DO NOT disassemble P3 Color. This will void the warranty.
• DO NOT install P3 Color in damp or wet locations.
• DO NOT obstruct the fixture’s air vents.
• Use safety cable (not included) when rigging P3 Color overhead.
• Only use Fiilex approved power supply and accessories. Failure to do so may damage the fixture.
• Shields, lenses or ultraviolet screens shall be changed if they have become visibly damaged to such an extent that their
effectiveness is impaired, for example by cracks or deep scratches.
• The lamp shall be changed if it has become damaged or thermally deformed.
• The luminaire is intended for professional use only.
Parts Diagram
23
4
5 1
7
6
8
17
13
14
16
15
18
19
9 10 11 12
Safety Instructions
210315A
User Guide
Question and Answer IconNeed help?

Do you have a question about the Fiilex P3 COLOR and is the answer not in the manual?

Summary

Safety Instructions

General Safety Precautions

Crucial safety guidelines including avoiding direct light exposure, not disassembling, avoiding wet locations, and using approved accessories.

Fixture Operation

Mode Selection

Instructions on how to enter, navigate, and select operating modes via the Menu Knob.

Fixture Control

Details on controlling fixture parameters manually using knobs and connecting via DMX/RDM for remote control.

Settings Management

Guide to accessing and editing fixture settings like DMX address, firmware info, and factory reset options.

Information Display

How to view current fixture firmware versions and internal temperature readings.

Fiilex P3 COLOR Specifications

General IconGeneral
TypeLED Fresnel
Color Temperature Range2700K - 6500K
Hue ControlYes
ControlDMX, Manual
CRI95
TLCI95
Power Consumption120W
Dimming0-100%
Operating Voltage100-240V AC