3.Audio
OPT/COAX output
Control the optical/coaxial output port, the default state is OFF.
SPDIF OUT
Coaxial output signal setting: This setting needs to be adjusted only when
using coaxial output
D2P mode, playing PCM signal will output native PCM signal; playing DSD
signal will output converted DSD signal;
DoP mode, PCM signal and DSD signal will be natively output.
[Note] DoP is preferred, D2P needs to selecting when some devices that do
not support DoP.
Gain
There are five gain levels: Ultra high mode, Super high, high, medium and low,
corresponding to five levels of output voltage. You can choose different gains
according to your headphones.
To Next Page
Loading...
