Fike SHP 10-051 - User Manual

Product Manual
Conventional
Fire Alarm/Suppression
System
Manual P/N: 06-130
Rev. No: 3, 04/02
P/N: 10-051
firealarmresources.com

Summary

Product Manual

Preface

Details the purpose and scope of the Fike SHP Product Manual.

Product Overview

Describes the Fike SHP as a compact, cost-effective fire alarm and suppression panel.

Equipment and Products

Describes the physical components and part numbers of the SHP control panel.

Specifications

Details environmental, power, and circuit specifications for the SHP system.

Enclosure Specifications

Outlines physical dimensions, mounting methods, and weight of the SHP enclosure.

Installation

Guides the user through the overall installation process for the SHP system.

Power and Field Wiring

Covers routing of field wiring, power limitations, and wire specifications.

Wiring Verification

Provides steps to verify input/output circuits for ground-fault absence and impedances.

Wiring Diagrams

Presents detailed wiring diagrams for the SHP controller and optional modules.

Circuit Configuration

Defines operation modes via SW3 dip switches for suppression and sprinkler functions.

SW3 Configuration

Explains how dip switches on the SHP controller determine system operation characteristics.

System Setup and Checkout

Guides through initial power-up, field wiring, checkout, and releasing hardware connection.

Operations

Details user switch interaction, diagnostic codes, and system operational states.

System Operations and Conditions

Explains modes, LED status, trouble types, and power conditions for system operation.

Alarm Operation (Suppression Mode)

Explains system responses during alarm, pre-discharge, and release states.

Alarm Operation (Sprinkler Mode)

Describes alarm operations and exceptions in sprinkler mode.

Supervisory Operation

Details system response to supervisory inputs and their deactivation.

Trouble Operation

Explains system behavior and troubleshooting indicators during trouble conditions.

Servicing

Outlines inspection, testing, maintenance, and troubleshooting procedures.

Typical Voltages and Tolerances

Provides typical voltage measurements and tolerances for SHP power and circuits.

Event Description and Resolution

Lists diagnostic codes and provides tips for resolving system events and troubles.

Battery Calculations

Explains how to calculate required battery capacity for normal and alarm operation.

ULC Operation

Details operational changes for ULC compliance and part numbers for ULC version.

Fike SHP 10-051 Specifications

General

Brand	Fike
Model	SHP 10-051
Category	Security System
Language	English