Fillmaster
Pharmacy Water Purification and Dispensing System
Installation Instructions and Service Guide
Model Fillmaster
®
Filtration Assembly with Model FMD 3400, 3600 , and 2600 dispenser
IMPORTANT INFORMATION
Welcome to the Fillmaster
®
Family! This illustrated guide contains step-by-step instructions and service information to
facilitate installation and continued life of your new system. Average installation time is about one hour. Before beginning
the installation process, please review this guide and examine all the contents of your shipment.
If you have questions about installation steps, please call customer service at (619) 596-9900. Most situations
can be explained over the phone.
The Fillmaster
System is an Advanced Reverse Osmosis Water Purification and Dispensing System. When properly
installed and maintained (See page 11 for recommended routine maintenance) the system will provide a long life of
constant pharmacy grade measured water. Keep in mind that you may use the Air Gap Faucet located near the sink as a
source of healthy drinking water. You may dispense non-measured water with the faucet or measured water with the
dispenser. Mount your dispenser at a convenient location anywhere in the pharmacy.
Be careful not to overturn the valves on the 2600 dispenser. Follow the arrows indicating the proper way to turn the
valve knobs for filling and dispensing. Don’t forget to maintain a service schedule. Use the last page of this service guide
to write down the date when the system was installed and each time you perform any service to the system. Change the
filters and clean the system frequently. NOTE: The filters must be replaced every 12 months at a minimum. As an
added value service, we can ship the filters automatically every 12 months to you. If you would like this service please
indicate on the product registration form.
Please return your product registration form promptly! This form is needed to activate the product warranty. We
need this so we can keep constant communication with you for product bulletins and updates regarding your Fillmaster
system.
Please install as directed. Any variance from the steps outlined in this guide may void the warranty. Please consult with
our customer service department before making any modifications.
NOTE: Professional installers, plumbers and contractors:
You must make this service guide available to the Pharmacy Manager where the unit is installed.
FILLMASTER
®
SYSTEMS, LLC
Customer Service
619-596-9900 FAX 619-596-8700
TOLL FREE 1-888-284-7873
www.fillmastersystems.com
PO BOX 711537
SANTEE, CA 92072-1537
To Next Page
Loading...