Film-Tech SA10 User Manual

Film-Tech
The information contained in this Adobe Acrobat pdf
file is provided at your own risk and good judgment.
These manuals are designed to facilitate the
exchange of information related to cinema
projection and film handling, with no warranties nor
obligations from the authors, for qualified field
service engineers.
If you are not a qualified technician, please make no
adjustments to anything you may read about in these
Adobe manual downloads.
www.film-tech.com

Film-Tech SA10 Specifications

General

Brand	Film-Tech
Model	SA10
Category	Adapter
Language	English

Summary

Section 1 Initial Setup and Installation

Mounting, Grounding, and Connections

Guidance on mounting, grounding, and connecting the SA10 unit for installation.

Power Wiring and Setup

Procedures for wiring mains power and connecting the SA10 unit's power supply.

Jumper and Switch Configuration

Configuration options using backpanel jumpers and front panel switches for the SA10.

Perform Alignment

Directs users to the appropriate alignment sections based on their cinema processor.

Section 2 Alignment with CP500

Programming the CP500 Format Screen

Steps to program the CP500 for Surround EX switching with the SA10.

Initial Setup for System Alignment

Performing initial setup and calibration for system alignment with CP500.

Set CP500 Output Levels

Adjusting the output levels on the CP500 for proper system calibration.

Equalize Surround Speakers

Equalizing surround speaker response using the SA10 and CP500.

Section 3 Alignment with CP65

Initial Setup

Initial setup steps for aligning the SA10 with a CP65 processor.

Set CP65 Output Levels

Equalize Surround Channels

Set Surround Output Levels

Final adjustment of surround output levels for optimal performance with CP65.

Section 4 Alignment with CP200

4.1 Initial Setup

4.2 Set CP200 P(Ls) and Q(Rs) Channel Eq to Flat

4.3 Set CP200 Output Levels

4.4 Equalize Surround Channels

4.5 Set Surround Output Levels

Section 5 Alignment with CP55

5.1 Initial Setup

5.2 Set CP55 Output Levels

5.3 Equalize Surround Channels

5.4 Set Surround Output Levels

Section 6 Alignment with CP45

6.1 Initial Setup

6.2 Set CP45 Output Levels

6.4 Equalize Surround Channels

6.5 Set Surround Output Levels