Need help?Do you have a question about the Filser Electronic ATR 57 COM and is the answer not in the manual?
General| Frequency Range | 118.000 to 136.975 MHz |
|---|---|
| Output Power | 6 W |
| Channel Spacing | 25 kHz |
| Transmitter Power | 6 W |
| Modulation | AM |
| Current Consumption | 1.5 A (transmit) |
Overview of the ATR 57 Handbook and its content structure.
Explains the ATR 57's VHF frequency range, design, and key features for VFR flying.
Lists detailed technical parameters including frequency range, channels, power, and dimensions.
Provides contact details for Filser Electronic GmbH.
General advice applicable to ATR 57 installation based on aircraft type.
Steps for visually inspecting the transceiver for damage before installation.
Details on instrument panel mounting, cut-out size, and fastening methods.
Guidance on cable routing, noise avoidance, fuse protection, and wiring diagrams.
Explains microphone inputs, bias, level control, and intercom VOX settings.
Provides guidelines for installing COM antennas, polarization, and placement.
Instructions for turning the unit on and adjusting received volume levels.
How to adjust squelch levels and set intercom VOX activation.
Details on using the memory selector and storing/selecting frequencies.
Explanation of low-battery and frequency drift indicators.
Information on transmit mode activation and receiving signal indications.
Details the type-examination certificate issued by CETECOM GmbH.
Presents the EC-Type Approval Certificate for electromagnetic compatibility.
Shows the Ecanadian Certificate from Industry Canada for radio compliance.
To Next Page
