EasyManua.ls Logo

Filtermaster OSMOPOWER 2.0 - OSMOPOWER 2.0 Technical Data and Spare Parts; Key Technical Performance Data; Ordering Genuine Replacement Parts

Default Icon
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
Accessories for aquaristic, terraristic and pet needs
can be ordered at Papillon, e.g.:
Care utensils
Water conditioners
Food
Loose filter media
Filtermaster replacement sponge
suitable for Eheim filter systems
Technical data
Ratio of osmosis water – residual water 1 : 3-4 adjusted
(dependant on temperature and pressure of tap water)
Working pressure 3–8bar
Temperature 1–30 °C
High-quality membrane TFM polyamide – polysulfone
Pressure retention capability 95%
Baseline water values 10–40 microsiemens
Max. performance 190l/day (50 GDB)
with a working pressure of 4bar at 25°C (drinking water has
an osmotic pressure of less than 2bar)
Performance under practical conditions 100 - 170l/day
with a working pressure of 3-6bar at 10-15°C
Please only use original spare parts
Superfine prefilter Art. 00639
Activated carbon filter Art. 00638
Osmosis membrane Art. 00634
Ultrapur Resin end filter Art. 00637
Ultrapur Resin refill 1l Art. 00636
Osmosis hose 3m Art. 00635
Membrane:
The membrane usually has a life of several years when using tap water with medium hardness and back-
flushing it regularly. After that, it must be replaced.
Protect the membrane against frost and drying out.
Downtime:
The system can be switched off for a longer time without any problems. If a downtime of the system for
more than six weeks is planned, we recommend to fill it with disinfectant. When restarting the system,
flush it for approx. 15 to 20 minutes. This is also recommended in the event of shorter downtime periods.