30
(GB) For the latest copy of this installation and
maintenance manual, plus films showing how to install and
service Filtermist units please visit the Customer Support
section on our website:
https://www.filtermist.com/customer-support/
(D) Für die neueste Ausgabe des Installations- und
Wartungshandbuchs sowie Filme, die zeigen, wie Filtermist-
Einheiten installiert und gewartet werden, besuchen Sie
bitte den Abschnitt Kundendienst auf unserer Website:
https://www.filtermist.com/customer-support/
(F) Pour obtenir la dernière copie de ce manuel
d’installation et d’entretien, ainsi que des films montrant
comment installer et entretenir les unités Filtermist, veuillez
visiter le support client sur notre site Web:
https://www.filtermist.com/customer-support/
(I) Per la copia più recente di questo manuale di
installazione e manutenzione, oltre ai filmati che mostrano
come installare e riparare le unità Filtermist, visitare la
sezione “Assistenza clienti” sul nostro sito Web:
https://www.filtermist.com/customer-support/
(E) Para obtener la copia más reciente de este manual
de instalación y mantenimiento, además de videos que
muestran cómo instalar y dar servicio a las unidades
Filtermist, visite la sección de Atención al cliente en nuestro
sitio web: https://www.filtermist.com/customer-support/
(C)
Filtermist’s F Monitor 2 & 2+ uses a globally
recognised traffic light system of coloured
warning lights to alert machine operators
when an oil mist collector needs servicing.
Filtermist F监视器2 及
2+采用全球通用的红绿灯系统，彩色警示灯在油
雾收集器需要维护时会向机器操作工发出警示信
号。
F Monitor 2 units can be retrofitted to the entire
Filtermist range – please speak to your local
distributor for more details or visit the Oil Mist
Accessories section on www.filtermist.com.
F监视器2可以应用到整个Filtermist油雾收集器系
列-
请与您当地代理商联系以了解更多详情或访问w
ww.filtermist.com油雾收集器附件版块。
There is a separate Installation Manual for the F
Monitor 2 and 2+ which can be downloaded from
this page on the Filtermist website:
https://www.filtermist.com/customer-support/
F监视器2及2+有一个独立的安装手册，可以从Filt
ermist网站以下页面下载:https://www.filtermist.c
om/customer-support/。
If your unit includes a drum bush, tighten to
20Nm, if it includes taper collar(s), tighten bolt to
8Nm.
如果您的设备包含滚筒衬套，紧固到20Nm，如
果它包含锥形箍，紧固螺栓到8Nm。
High-Efficiency Afterfilter (99.95% efficiency)
高效后置（效率99.95%）
For the latest copy of this installation and
maintenance manual, plus films showing how to
install and service Filtermist units please visit the
Customer Support section on our website:
有关本安装和维护手册的最新版本，以及展示如
何安装和维护油雾收集器的视频，请访问我们网
站上的客户支持部分。
Filtermist’s F Monitor 2 & 2+ uses a globally
recognised traffic light system of coloured
warning lights to alert machine operators
when an oil mist collector needs servicing.
Filtermist F监视器2 及
2+采用全球通用的红绿灯系统，彩色警示灯在油
雾收集器需要维护时会向机器操作工发出警示信
号。
F Monitor 2 units can be retrofitted to the entire
Filtermist range – please speak to your local
distributor for more details or visit the Oil Mist
Accessories section on www.filtermist.com.
F监视器2可以应用到整个Filtermist油雾收集器系
列-
请与您当地代理商联系以了解更多详情或访问w
ww.filtermist.com油雾收集器附件版块。
There is a separate Installation Manual for the F
Monitor 2 and 2+ which can be downloaded from
this page on the Filtermist website:
https://www.filtermist.com/customer-support/
F监视器2及2+有一个独立的安装手册，可以从Filt
ermist网站以下页面下载:https://www.filtermist.c
om/customer-support/。
If your unit includes a drum bush, tighten to
20Nm, if it includes taper collar(s), tighten bolt to
8Nm.
如果您的设备包含滚筒衬套，紧固到20Nm，如
果它包含锥形箍，紧固螺栓到8Nm。
High-Efficiency Afterfilter (99.95% efficiency)
高效后置（效率99.95%）
For the latest copy of this installation and
maintenance manual, plus films showing how to
install and service Filtermist units please visit the
Customer Support section on our website:
何安装和
站上的客户支持部分。
Customer Support
Mounting the Unit
2
(GB) General Information
A Filtermist unit is an oil mist collector that use centrifugal impaction to remove or reclaim oil mist, coolant,
fume and steam from manufacturing operations. This manual describes how to install and maintain your
Filtermist unit. Please read all instructions before commencing any installation or maintenance work. Original
instructions are in English, all other languages are translations of this.
(F) Généralités
L’unite Filtermist est un collecteur de brouillard d’huile qui utilise l’impaction centrifuge pour éliminer ou
récupérer le brouillard d’huile, le liquide de refroidissement, les fumées et la vapeur provenant des opérations
de fabrication. Ce manuel décrit comment installer et entretenir votre unité Filtermist. Veuillez lire toutes les
instructions avant de commencer les travaux d’installation ou de maintenance. Les instructions originales sont en
anglais, toutes les autres langues sont des traductions de l’originale.
(D) Allgemeine Informationen
Ein Filtermistgerät ist ein Ölnebelfänger, welcher einen Zentrifugalabscheider benutzt um Öl Nebel, Kühlmittel,
Rauch und Dampf von Produktionsvorgängen zu beseitigen oder zu regenerieren. Diese Anleitung beschreibt,
wie das Filtermistgerät zu installieren und zu warten ist. Bitte lesen Sie alle Anweisungen sorgfältig vor
Montagebeginn, Inbetriebnahme oder Wartung. Die Original Anleitung ist in Englisch verfasst und alle anderen
Sprachen wurden von dieser aus übersetzt.
(I) Informazioni Generali
L’Unità Filtermist è un aspiratore che utilizza la forza centrifuga per rimuovere alla fonte nebbia oleosa, fumo e
vapore dalle macchine utensili. Questo manuale descrive come installare e manutenere correttamente l’unità
Filtermist. Si chiede di leggere attentamente tutte le istruzioni riportate nel manuale prima di procedere
all’installazione o alla manutenzione del filtro. Le istruzioni originali sono in Inglese, tutte le altre sono
traduzioni.
(E) Información General
Una unidad Filtermist es un colector de neblina de aceite que utiliza la fuerza centrífuga para eliminar o recuper-
ar la neblina de aceite, refrigerante, humo y vapor de las operaciones de fabricación. Este manual describe cómo
instalar y mantener su unidad Filtermist. Lea todas las instrucciones antes de comenzar cualquier trabajo de
instalación o mantenimiento. Las instrucciones originales están en Inglés, todos los demás idiomas son
traducciones.
(C) 综述
菲特米斯得是一款油雾收集器，利用离心力，在加工生产期间，清除并收集油雾、冷却剂、 烟雾及蒸汽等。此手册
描述菲特米斯得产品安装及维护方式。在安装与维护之前，请阅读本手册所有说明。本手册说明初始版本为英文，其
他语言为翻译本.
(GB) Warning!
1. Isolation from any power supply shall either be visible (visible break in the power supply circuits) or the
isolation device is actuated to the off position and physically locked off.
2. The unit must not be operated without the case fitted.
3. At least 120 seconds must be allowed for the inner drum to stop rotating before the case is removed.
4. Oil leaks can be a hazard. The complete Filtermist system should be checked regularly for possible oil leaks.
Daily visual checks of both unit and extraction duct are recommended.
5. Contact with oils, coolants etc. can cause skin disorders. Avoid contact with skin and eyes and wear PVC, neo
prene or nitrile gloves, safety glasses and overalls when cleaning or working on the filter.
6. The unit to be used on wet applications only, e.g. Oil, emulsion, coolant.
7. The unit is not to be used on flammable, explosive, corrosive or dry applications, e.g dust, smoke, acid.
8. The unit is intended for indoor use only.
Mounting the Unit
2
(GB) General Information
A Filtermist unit is an oil mist collector that use centrifugal impaction to remove or reclaim oil mist, coolant,
fume and steam from manufacturing operations. This manual describes how to install and maintain your
Filtermist unit. Please read all instructions before commencing any installation or maintenance work. Original
instructions are in English, all other languages are translations of this.
(F) Généralités
L’unite Filtermist est un collecteur de brouillard d’huile qui utilise l’impaction centrifuge pour éliminer ou
récupérer le brouillard d’huile, le liquide de refroidissement, les fumées et la vapeur provenant des opérations
de fabrication. Ce manuel décrit comment installer et entretenir votre unité Filtermist. Veuillez lire toutes les
instructions avant de commencer les travaux d’installation ou de maintenance. Les instructions originales sont en
anglais, toutes les autres langues sont des traductions de l’originale.
(D) Allgemeine Informationen
Ein Filtermistgerät ist ein Ölnebelfänger, welcher einen Zentrifugalabscheider benutzt um Öl Nebel, Kühlmittel,
Rauch und Dampf von Produktionsvorgängen zu beseitigen oder zu regenerieren. Diese Anleitung beschreibt,
wie das Filtermistgerät zu installieren und zu warten ist. Bitte lesen Sie alle Anweisungen sorgfältig vor
Montagebeginn, Inbetriebnahme oder Wartung. Die Original Anleitung ist in Englisch verfasst und alle anderen
Sprachen wurden von dieser aus übersetzt.
(I) Informazioni Generali
L’Unità Filtermist è un aspiratore che utilizza la forza centrifuga per rimuovere alla fonte nebbia oleosa, fumo e
vapore dalle macchine utensili. Questo manuale descrive come installare e manutenere correttamente l’unità
Filtermist. Si chiede di leggere attentamente tutte le istruzioni riportate nel manuale prima di procedere
all’installazione o alla manutenzione del filtro. Le istruzioni originali sono in Inglese, tutte le altre sono
traduzioni.
(E) Información General
Una unidad Filtermist es un colector de neblina de aceite que utiliza la fuerza centrífuga para eliminar o recuper-
ar la neblina de aceite, refrigerante, humo y vapor de las operaciones de fabricación. Este manual describe cómo
instalar y mantener su unidad Filtermist. Lea todas las instrucciones antes de comenzar cualquier trabajo de
instalación o mantenimiento. Las instrucciones originales están en Inglés, todos los demás idiomas son
traducciones.
(C) 综述
菲特米斯得是一款油雾收集器，利用离心力，在加工生产期间，清除并收集油雾、冷却剂、 烟雾及蒸汽等。此手册
描述菲特米斯得产品安装及维护方式。在安装与维护之前，请阅读本手册所有说明。本手册说明初始版本为英文，其
他语言为翻译本.
(GB) Warning!
1. Isolation from any power supply shall either be visible (visible break in the power supply circuits) or the
isolation device is actuated to the off position and physically locked off.
2. The unit must not be operated without the case fitted.
3. At least 120 seconds must be allowed for the inner drum to stop rotating before the case is removed.
4. Oil leaks can be a hazard. The complete Filtermist system should be checked regularly for possible oil leaks.
Daily visual checks of both unit and extraction duct are recommended.
5. Contact with oils, coolants etc. can cause skin disorders. Avoid contact with skin and eyes and wear PVC, neo
prene or nitrile gloves, safety glasses and overalls when cleaning or working on the filter.
6. The unit to be used on wet applications only, e.g. Oil, emulsion, coolant.
7. The unit is not to be used on flammable, explosive, corrosive or dry applications, e.g dust, smoke, acid.
8. The unit is intended for indoor use only.
To Next Page
Loading...
Need help?
General
