FIMAK SPM-40 - Page 76

FİMAK
DD.009 / Rev. No 00 SPİRAL MİKSER MAKİNASI
Tarih 10.10.2012 Sayfa 76 / 92
4. 4. MAINTENANCE AND SAFETY INSTRUCTIONS
4.1 PERIODIC LUBRICATION
Fill the grease nipple on the
Lower Die-Casting Bearing
Housing with grease once a
month.
Fill the grease nipple on the
Upper Die-Casting Bearing
Housing with grease once a
month.
Fill the grease nipple on the
Lower Tension Die-Casting
Bearing Housing with grease
once a month.
Maintenance Instructions
Fill the grease nipple on the
Bowl Balance Roller with
grease once a month.