GENERAL
INFORMATION
1
Safety devices
Forced retension on button: Releasing the
button cuts off power to the utensil and turns it off,
stopping the utensil
Switch protection: The protection protects the
operator from accidentally starting the utensil in
normal work conditions.
Safety information
• Careful consultation of this manual before installation and use is essential. Continual observance of the
indications found in the manual guarantee personal and machine safety.
• Never tamper with safety devices for any reason.
• Strict observance of the work safety regulations issued by the responsible organisations in each country
is strongly recommended.
• The manufacturer is not liable for damages to persons or things due to the neglect of safety regulations.
• Correct machine placement, illumination and cleanliness are important conditions for personal safety.
• Do not expose the machine to the elements.
• Machine connections and start-up must only be performed by specialised technicians.
• Make sure that the system specifications of the room where the machine is installed correspond to the
information printed on the plate.
• Make sure the machine is connected to a grounding system.
• The work area around the machine must always be kept clean and dry.
• Use the garments foreseen by work safety regulations.
To Next Page
Loading...
