: Displays the applications opened in the background, corresponding to pressing and holding the C1 button
for 1.5 seconds; on this interface, you can also close the APP by swiping it up
：Return to the main interface, corresponding to double-pressing the C1 button
：Return to the previous menu, corresponding to press the C1 button
Install third-party apps
TX10 supports installing third-party Android apps through SD card and app store.
Notice： Too many Android app downloads and installations will affect the smoothness of the operation
of the device.
Power on the remote control, and make sure that remote control’s network connection is normal.
Open the FIMI Navi2.0 App, if the remote control has a version update, the upgrade entry will pop
up in the status bar of the App interface, click to enter.
FIMI Navi2.0 will download and upgrade the firmware by itself.
After the upgrade is complete, the remote control will restart automatically.
Notice：
• When upgrading, make sure that the battery level of the remote control is at least 20%.
• The entire upgrade process will take up to about 10 minutes (depending on the connection to the network and the number of
firmware to be upgraded). Please ensure that the remote control can access to the Internet throughout the upgrade process.
7. Firmware upgrade
To Previous Page
Loading...