FINAL-Modellbau AEROFOAM L-39 User Manual (English)

To Next Page

FINAL-Modellbau In den Stöcken 20

GLOBAL JET CLUB Europe D-34305 Niedenstein

info@modellbau.de Phone: 0049 5624 922486

Seite - page 1 / 7

Appendix – L-39

Ruderausschläge (standard):

Höhenruder: +/- 20mm (gemessen am Rumpf)

Querruder: +/- 15 bis 20mm (gemessen in Richtung Tip Tank)

Seitenruder: +/- 20 bis 30mm (kann individuell angepasst werden)

Landeklappen (gemessen am Rumpf):

1. Start: -25mm

2. Landung: - 65-70mm

Schwerpunkt: 115mm hinter der Nasenleiste – kann auch weiter nach hinten verlegt werden

rudder deflections:

elevator: +/- 20mm (measured on the side of fuselage)

Aileron: +/- 15-20mm (measured on the side of the wingtip)

Rudder: +/- 20-30mm (can be individually adapted)

Flap (measured on the side of the fuselage):

1. start: -25mm

2. landing: - 65-70mm

CG: 115mm behind the leading edge – can be moved to the backwards to adapt personal needs

Need help?

Do you have a question about the FINAL-Modellbau AEROFOAM L-39 and is the answer not in the manual?

FINAL-Modellbau AEROFOAM L-39 Specifications

General

Brand	FINAL-Modellbau
Model	AEROFOAM L-39
Category	Toy
Language	English

Summary

Rudder Deflections and Specifications

Elevator Deflections

+/- 20mm (measured on the side of fuselage)

Aileron Deflections

+/- 15-20mm (measured on the side of the wingtip)

Rudder Deflections

+/- 20-30mm (can be individually adapted)

Flap Deflections

Start: -25mm, Landing: - 65-70mm

Center of Gravity (CG)

115mm behind the leading edge, can be moved backwards.

Assembly Additions and Linkages

Turbine Heat Protection

Apply aluminum tape above thrust pipe for heat protection.

Aileron Linkage Length

Length from center screw to center screw: 88mm.

Elevator and Rudder Linkage Lengths

Elevator Linkage Length

Length from center screw to center screw: 97mm.

Rudder Linkage Length

Length from center screw to center screw: 95mm.

Flap Linkage and Landing Gear

Flap Linkage Length

Length from center screw to center screw: 79mm.

Landing Gear Struts

Adhesive grease for damping, adjustable for softer landings.