Final Sound S110 - S110 Subwoofer Specifications

FINAL SOUND SOLUTIONS S110 SUBWOOFER MANUAL vs. 1.6 -US- c FSS 2006R 22
.
12. Specifications S110
Size
32,5cm cube, with 5cm high feet
Weight
13.9 kilograms
Type
Downfiring + bass reflex
Anechoic Frequency Response
35 Hz to 200Hz, ±3 dB
In-Room Frequency Response
Typically 25 Hz to 220 Hz, ±3 dB
THD
Less than 3% THD at 95 dB SPL from 35 Hz and up
Maximum Output
108dB SPL in room
Amplifier Type
Discrete class A/B with linear power supply
Volume Adjustment
>60 dB of range
Crossover Frequency
60 Hz to 210 Hz
Crossover Type
4
nd
order Butterworth (24 dB/octave)
Subsonic Filter
Variable room gain compensation
Phase Adjustment
Selectable between 0 to 180 degrees + inverting switch
Power Output
100W RMS/200W Peak
High pass filter for the panels
Switch able (1,2,3) for 90i,150i,300i and 400i Final panels
Low Level Input Impedance
20 kΩ
High Level Input Impedance
1 kΩ
Effective Internal Volume
22 liters sealed with 400 grams of polyester stuffing
Driver
8 inch long throw driver
Approval
ETL UL Can CE CB