▇ Fault query
1. If the switch set to on, but don't switch on when time reach, or set to off, but don't switch off when
time reach, check the "week" whether it is correct, if wrong, please re-adjust.
2. If you confirm the "on" and "off" time is completely correct, but the switch is on or off when it is not at
the set time, please check the rest set time group, whether it is eliminated, if not, please clear it by the
"use method" (Please note that the switch time display "_ _: _ _" mean to clear, if 0:00, it is not clear)
3. If the above two are all correct, and the switch is still not normal action, please check whether it is in
"automatic" work.
▇ Note
1. In order to prevent the heat, caused by strong current, the wires must be tightened to the terminal
screws.
2. Do not use this control switch for such equipment (such as medical equipment and large equipment,
etc.) that may cause life-related accidents or have a significant impact on society due to errors.
3. Do not touch the terminal after turning on the power.
4. The product should work in the absence of moisture, corrosion and heavy metal content of the gas
environment, do not contaminate the oil or water.
5. Warranty is one year.
To Previous Page
Loading...
General