Fini MEGA SD 75 - Page 20

MENU B
(
UT
)
20
20
MEGA SD - Cod.197DD8100
GB
START-Up AND OpERATION
This menu can also be accessed with the compressor running.
lf no key is pressed, the main screen page is redisplayed automatically after 60
seconds.
it is possible to return to the main screen page from any point of the
K4-ESC-key
4.2 MENU TREE (CONTROL AND PROGRAMMING)
This is the structured menu used to carry out all compressor control and programming operations.
The options and setting in the various menu can be:
(ref. paragraph 4.2.2)
(ref. paragraph 4.2.3)
(ref. paragraph 4.2.4)
visible only if theCAN-BUS interface has been instalied
(ref. paragraph 41.5)
(ref. paragraph 4.2.6)
(ref. paragraph 4.2.7)
(ref. paragraph 4.2.1)
(ref. paragraph 4.2.8)
Pressure XX.X bar (psi)
Temperature XXX °C(°F)
Ready for start
10:40 MON 25/05/2011
>MAINTENANCE <
…..
>GENERAL SETTING<
……
>NETWORK SETTING<
.......
>OPERAT. PARAMETERS<
…..
>PROGRAMMING <
…..
>DIAGNOSTIC<
…..
>PASSWORD<
…..
>INFORMATION<
…..