EasyManua.ls Logo

Finishing Touch FLAWLESS Body User Manual

Finishing Touch FLAWLESS Body
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
TO REMOVE AND REPLACE
TRIMMING COMB
• Select one of the Trimming Combs
provided and place it on the head,
ensuring both sides snap into place
(Image 11). Teeth can face both directions.
• Place thumb on top of Trimming Comb
(Image 12) and push down to ip comb
o head (Image 13).
• Lift Trimming Comb o head.
For optimal results, replace the head every 1-3 months, depending on frequency
of use or when it no longer provides the desired results.
TO REPLACE HEAD
• Remove any attachments. Place head cover on.
With cover on, gently, press the head release button and pull up while holding
the head to prevent falling (Image 14-15).
• Hold the new head by its sides and press onto the neck of unit. There will
be a click” when the head is secure.
NOTE: Be sure the stem (Image 15) found on the neck of the unit (under the head)
is centered prior to securing to unit. After replacing, if head does not move once
turned on, remove the head, turn unit on briey, turn o, then reinstall head.
CLEANING AND STORAGE
• Do not rinse or submerge into water or other liquid.
The Flawless Body head is fragile – please handle with care.
• Before storing or reusing, be sure to clean head with the brush provided making sure to remove
all residual hairs.
• Store your unit, attachments, brush, charging cord and plug in a dry, safe place.
For additional Flawless items, accessories, how-to-videos and to register your product,
please go to www.FlawlessBeauty.com
Care and Maintenance
Distributed by:
Wayne, NJ 07470
Made in China © 2019 Ideavillage
customerservice@ideavillage.com
FLAWBOD030619MW
DRY USE ONLY
(See cleaning instructions inside)
• DRY USE ONLY
• Do not rinse. Only use brush to clean head.
• Keep out of the reach of children.
• Do not place or drop in water or other liquid while
plugged in.
• Do not rinse or submerge into water or other liquid.
• Unplug and remove power cord before
cleaning/using.
Warning
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
This unit contains a Lithium Ion battery. Dispose
of in accordance with all applicable federal, state
and local regulations.
• Do not dispose of in re.
• Do not use on broken or irritated skin.
• Always check the unit before use. Do not use if
damaged, as personal injury may occur.
Image 13Image 12
Image 11
Image 14
Place thumb here
Press down
THE TOTAL BODY HAIR REMOVER
Image 15
Please register your Flawless Body
and to receive special offers,
go to www.FlawlessBeauty.com
Attachments (continued)
Stem
Question and Answer IconNeed help?

Do you have a question about the Finishing Touch FLAWLESS Body and is the answer not in the manual?

Finishing Touch FLAWLESS Body Specifications

General IconGeneral
BrandFinishing Touch
ModelFLAWLESS Body
CategoryElectric Shaver
LanguageEnglish

Summary

Attachments

TO REMOVE AND REPLACE TRIMMING COMB

Instructions for attaching and detaching the trimming comb from the device head.

Care and Maintenance

TO REPLACE HEAD

Steps for removing and installing a new head unit on the device.

CLEANING AND STORAGE

Guidelines for cleaning and proper storage of the Flawless Body unit.

Warning

Your Flawless Body Kit

Using Flawless Body

CHOOSING THE RIGHT ATTACHMENT

Guidance on selecting and using different attachments for hair removal.

TO REMOVE AND REPLACE SENSAGUARD

Instructions for attaching and detaching the SensaGuard accessory.

Getting Started

CHARGING / RECHARGING

Steps for charging the device and understanding charging indicators.

OPERATING TIME

Information on the cordless operating time and battery status.

Related product manuals