Finishing Touch Flawless Brows User Manual

Installing / Changing Battery
• Remove cap.
• Hold top and bottom of unit and pull apart to reveal
battery compartment [Image 1].
• Place 1 AAA battery (included) into battery
compartment as indicated [Image 2].
• Slide/snap bottom casing back into place.
NOTE: Prior to rst use, test unit on small area. If
sensitivity or allergic reactions occur, discontinue use
immediately.
How to Use
• Slide switch to ON position [Image 3]. Light will
turn on.
• Use on clean, dry skin. Pull skin tight and move in
small back and forth motions [Image 4].
NOTE: It is normal for hair removal head to become
warm with use.
For any questions or
comments, visit
www.FLAWLESSBEAUTY.com
IMAGE 6A
IMAGE
6B
(c)
IMAGE 5
(c)
IMAGE 4
IMAGE 2
IMAGE 1
IMAGE 3
ON
For Optimal Results
• Use on clean and completely dry skin with no cream or
cosmetic residue.
• Pull skin tight and move in small back and forth
motions [Image 4].
• If unit begins to slow down, clean head of hair residue.
• If unit is still running slow, change battery.
• It is normal for skin to appear red immediately after
use due to pressure and friction applied.
Cleaning (Be sure unit is o)
• After each use, clean head with included
brush.
• Twist head counter-clockwise and lift o
[Image 5].
• Gently brush away hair residue on stem (c)
[Image 6A].
• Use brush inside head [Image 6B].
• Place head back on unit and twist
clockwise until it locks back in place.
PLEASE NOTE: The more you use Flawless Brows, the more precise your results will be.
Please allow time for your hair and skin to become accustomed to this new innovative way
to remove hair.

Finishing Touch Flawless Brows Specifications

General

Brand	Finishing Touch
Model	Flawless Brows
Category	Hair Removal System
Language	English

Summary

Installing and Changing Battery

Access Battery Compartment

Hold the unit firmly and pull the top and bottom apart to reveal the battery compartment.

Insert AAA Battery

Place one AAA battery into the designated compartment as indicated.

Secure Battery Casing

Slide or snap the bottom casing back into place to close the unit.

How to Use Flawless Brows

Activate the Device

Slide the switch to the ON position; the indicator light will turn on.

Hair Removal Technique

Use on clean, dry skin. Pull skin tight and move the unit in small back and forth motions.

Achieving Optimal Results

Prepare Skin for Use

Ensure skin is completely dry and free from any creams or cosmetic residue.

Effective Hair Removal Motion

Pull skin taut and use small, back-and-forth motions for precise hair removal.

Addressing Slow Performance

Clean hair residue from the head or change the battery if the unit slows down.

Expected Skin Reaction

Skin may appear red immediately after use due to pressure and friction.

Cleaning the Device

Disassemble for Cleaning

Ensure the unit is off, then twist the head counter-clockwise and lift it off.

Brush Away Hair Residue

Use the included brush to gently clean hair residue from the stem and inside the head.

Reassemble After Cleaning

Place the head back onto the unit and twist clockwise until it locks securely.

Quick Start Guide

Install Battery Step

Hold the unit, pull apart to reveal compartment, and install battery.

Turn Unit On Step

Slide the switch to the ON position to activate the device.

Remove Hair Step

Use on clean, dry skin; pull skin taut and move in small back and forth motions.

Safety Cautions

Note age restrictions, intended use, skin conditions, water exposure, and battery disposal.