Storing: !
• Store the appliance on an even surface out of the reach of children. !
• Do not press the lid so it locks when storing in order to prevent !
deformation of the gaskets of the appliance.!
• Wind the cord into the cord winding device behind the appliance. !
!
!
!
!
!
Troubleshooting!
Check that the switch has been plugged to a wall
outlet.!
!
Check the cord for any damage.!
!
Check that the vacuum bag is positioned correctly in
the appliance (see previous instructions).
The appliance comprises a built-in sensor. The
appliance does not switch over to sealing, if the
necessary pressure has not been reached during the
vacuum process.
!
Check the sealing strip and remove any possible
impurities.
!
Check the gaskets and remove the lower one for
cleaning when needed. If they have been damaged,
they should be replaced.
!
The vacuum bag may leak. Check the bag by sealing
it with some air in it and immerse it in water. If the
bag emits bubbles, it is leaking. Seal the bag again
or use a new one.
!
Dirt or liquid in the bag opening can make it
difficult to seal the bag. Open the bag and wipe
round the opening before you put it horizontally on
top of the sealing strip.
To Next Page
Loading...