Finnvacum Pro - User Manual

Questions and Answers

J
janeporterAug 5, 2025
Why is there air in my Finnvacum Pro vacuum packed bag?
- M
  mckenziefletcherAug 5, 2025
  If you find air in the bag after vacuum packing with your Finnvacum Kitchen Appliances, it could be due to several reasons. Leakage may occur because of wrinkles, liquid, or particles along the sealing edge. Ensure the bag opening and lid are clean and dry before sealing. Make sure the bag opening is correctly positioned above the sealing strip within the vacuum channel. Check the gaskets to ensure they are complete, clean, and correctly placed. The bag itself may have a leak; test it by sealing it with air inside and immersing it in water to check for bubbles. Use only original Finnvacum vacuum bags. Also, avoid vacuum packing items that could damage the bag, and leave a 7 cm gap between the contents and the bag opening. If there is too much air in the bag, shorten the bag.
N
natalie28Aug 10, 2025
What to do if my Finnvacum Pro does not seal the vacuum bag?
- S
  Stephen WoodAug 10, 2025
  If your Finnvacum Kitchen Appliances vacuum bag isn't sealing after the vacuum process, it might be because the appliance's built-in sensor hasn't detected enough pressure. To resolve this, first inspect the sealing strip for any dirt and clean if necessary. Then, check the gaskets, cleaning the lower one if needed. If the gaskets are damaged, replace them. Also, the vacuum bag may be leaking, so test it by sealing it with air and immersing it in water to check for bubbles. If the bag leaks, reseal or use a new one. Lastly, dirt or liquid in the bag opening can interfere with sealing, so wipe the opening clean before placing it on the sealing strip.
J
joshua05Aug 14, 2025
Why does air penetrate into the bag after sealing with my Finnvacum Kitchen Appliances?
- M
  morenolouisAug 15, 2025
  If air gets into the bag after sealing with your Finnvacum Kitchen Appliances, it could be due to leakage caused by wrinkles, crumbs, or food particles along the bag's edge. Try opening the bag and cleaning the inner side of the opening, then stretch it before placing it over the sealing strip. Note that natural gases from fruits and vegetables may cause this issue; if you suspect the contents are spoiled, close the bag. Check the bag for holes and avoid vacuum-packing hard, sharp-edged materials without wrapping them in kitchen paper first.
W
William VincentAug 19, 2025
How to fix Finnvacum Pro Kitchen Appliances when nothing happens during vacuum sealing?
- K
  Kevin GreenAug 19, 2025
  If nothing happens when you try to vacuum seal a bag with your Finnvacum Kitchen Appliances, ensure the appliance is plugged into a working wall outlet. Inspect the power cord for any signs of damage. Also, verify that the vacuum bag is correctly positioned inside the appliance, following the provided instructions.
E
Erik CamposAug 25, 2025
What to do if Finnvacum Kitchen Appliances vacuum container cannot be vacuum packed?
- M
  Michael HarrisAug 25, 2025
  If the vacuum container cannot be vacuum packed with your Finnvacum Kitchen Appliances, make sure the vacuum tube is correctly connected to both the appliance and the lid. Ensure the lid lock is set to the “SEAL” position. During sealing, press down on the lid and the tube coupling. Check the vacuum container for any damage and replace it if necessary. Also, verify that the edge of the lid is clean and dry.
M
Michael TorresAug 30, 2025
Why is the vacuum bag melting in my Finnvacum Kitchen Appliances?
- A
  Alexa MurphyAug 30, 2025
  If the vacuum bag is melting when using your Finnvacum Kitchen Appliances, open the appliance lid and allow the sealing strip and its element to cool down for a few minutes. Ensure you are only using original Finnvacum bags and film.