9. LED progress!
Indicates the status of the ”Vacuum” or ”Sealing Time” process.!
10. Tube coupling!
For containers and sealing of bottles.!
11. Handle!
Press down the handle to lock the lid and lift it to reopen.!
12: Air suction!
Do not cover the inlet with the vacuum bag during vacuum packing/sealing.!
13: Vacuum channel!
Position the open end of the bag in the vacuum channel. !
Air is let out of the bag and the vacuum channel collects possible liquid from the bag.!
14: Sealing brake!
For sealing of the bag (removable).!
15: Lower gasket!
Removable.!
16: Sealing element + teflon tape!
Seals the vacuum bag.!
17: Upper gasket!
Removable.!
18: Roll cutter!
Use the built-in cutter to cut to the required length of the clingfilm.!
19: Roll holder!
Built-in roll holder for clingfilm.!
!
How to use the appliance!
How to make a vacuum bag of film!
1. Position the appliance on an even surface and plug to a wall outlet, turn on the switch on back of
the appliance to ”I” (the signal lamps Sealing Time/Dry and Vacuum/Normal will go on).!
!
2. Open the top cover of the device where !
the supplied plastic roll is placed. !
Then lift up the built-in cutter.!
!
!
!
To Next Page
Loading...