Need help?Do you have a question about the FIORENTINI I38UE and is the answer not in the manual?
Defines the manufacturer's liability regarding machine use and modifications.
Guidance on using original spare parts for better operation and to avoid greater damages.
Guidance on reporting model, series number, faults, and checks when requesting service.
Notice regarding potential changes to the machine not immediately reflected in the manual.
Adherence to CEE rules and local standards for operator safety.
Prohibits sucking inflammable and/or toxic liquids and powders.
Warns against touching machine parts while they are in motion.
Details on how the machine should be operated by authorized personnel.
Specific advice regarding the rotating headlight and switch positions.
Instructions for charging, checking, and topping up battery cells.
Guidance on using qualified personnel and original fuses for maintenance.
Advice on using detergents carefully and with protective clothing.
Operations on the electric installation must be performed by qualified electricians.
Ensures safety devices are checked by qualified personnel every six months.
Annual safety compliance check and warnings for explosive environments.
Information on safe disposal of harmful materials and machine demolition.
Steps for returning parts for warranty replacement.
Identification and description of all controls located on the machine's dashboard.
Details on the emergency stop system and its correct usage.
Description of the parking and emergency brake mechanisms.
Steps for initial setup, including machine checks and battery installation.
Guidelines for installing the charger and choosing appropriate cleaning solutions.
Procedures for scrubbing operations, water filling, and tank cleaning.
Routine maintenance tasks categorized by frequency (daily, weekly, monthly, etc.).
Procedures for checking battery charge, density, and topping up water.
Information on battery charging limits, temperature, and room safety.
Guidelines for maintaining battery health during periods of inactivity.
Procedure for replacing worn squeegee blades to ensure effective drying.
Instructions for checking, cleaning, and maintaining vacuum motors.
General| Model | I38UE |
|---|---|
| Category | Floor Machine |
| Working Width | 380 mm |
| Power Supply | Electric |
| Frequency | 50 Hz |
To Next Page
