Need help?Do you have a question about the Fiorenzato F64 and is the answer not in the manual?
General| Burr Type | Flat |
|---|---|
| Burr Size | 64 mm |
| Hopper Capacity | 1.5 kg |
| Power | 350 W |
| Dimensions | 230 x 615 x 270 mm |
| Grinding Adjustment | Stepless micrometric |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Type | Electric |
Covers essential safety guidelines, usage instructions, and warnings for safe operation.
List of necessary tools and equipment for replacing grinder blades.
Explanation of the display alarm indicating when blades need replacement.
Step-by-step guide to emptying the grinding chamber before blade replacement.
Instructions for removing the ring nut lever and the hopper's locking screw.
Procedure for disassembling the micro hopper component.
Steps to detach the ring nut and the fixed blade holder.
Guide on separating the fixed blade holder from the ring nut.
Instructions for removing the rotating blade from its holder.
Detailed process for cleaning the grinding chamber.
Steps for reassembling the rotating blade and cleaning the machine thread.
Procedure for cleaning the fixed blade holder and the ring nut thread.
Final steps for assembling the grinder blades and related components.
List of tools required for replacing the display unit.
Procedure for removing the coffee exit tube.
Steps to disassemble the portafilter fork.
Instructions for removing the black pins labeled "A".
Procedure for removing adhesive stickers covering screws.
Steps to unscrew the fasteners securing the display.
Instructions for detaching the display unit from the machine.
Guide on disconnecting electrical wires from the circuit board.
Procedure for reconnecting the wires to the new display.
Steps for fitting the new display unit into place.
Instructions for fastening the display unit using screws.
Final steps for reassembling the machine and testing the display.
List of tools required for scale board replacement.
Initial step to invert the coffee grinder for access.
Instructions for removing the protective side panels.
Steps to unscrew the fasteners for the fork support.
Procedure for detaching the scale holder assembly.
How to access the internal electrical components and scale board.
Steps to access the board responsible for scale management.
Instructions for replacing the scale circuit board.
Procedure for reattaching the protection wings.
Steps to secure the protection wings with screws.
Instructions for securing the fork support with screws.
Post-replacement steps including calibration and weight usage.
To Next Page
