Fireboy- Xintex CG2 - User Manual

1
18004
04/03/2007 Rev. C
CG2 & MA2 Series
Clean Agent FE-241 & HFC-227ea
Owner’s Manual
&
Installation Instructions
For all sizes 25 cubic feet to 1500 cubic feet
Read and comply with all instructions, warnings
and limitations before installing, servicing or
removing this device.

Summary

General Safety Warnings and Health Hazards

Medical Instructions

Guidance for responding to exposure to the extinguishing agent.

Installation Warnings and Specifications

Marine Installation Instructions

Pre-Installation Checks and Location Selection

Steps before installation and guidance for selecting a suitable location.

Fireboy System Mounting Procedure

Instructions for physically securing the fire extinguishing unit.

System Integration and Indicator Lamp Installation

Indicator Lamp Mounting and Wiring

Instructions for mounting and wiring the system indicator lamp.

Wiring Safety and Instructions

Cable Installation and Indicator Lamp Usage

Cable Management and Control Panel Installation

Cable Jamming and Routing Procedures

Escutcheon Panel and T-Handle Assembly

Connecting the Fireboy System Cable to Cylinder

Final Cable Connection Steps

Fireboy Extinguisher Operation Modes

Automatic and Manual Actuation Methods

How the system operates automatically and manually.

Post-Actuation Procedures and Maintenance

Extinguisher Maintenance and Cable Inspection

Fireboy- Xintex CG2 Specifications