Multi-purpose Bracket Installation
Work with Firecore FLP370C / FLP370CX pole
Fix the Bracket onto the rod sections through slot on
the back clip and lock the pole lock.
Work with metal surfaces
Remove the back clip and attach the magnet bracket
onto metal surfaces.
Work with ceiling
Fix the bracket onto the ceiling through two screws
on the top of the bracket.
Work with other tripod or laser pole
Fix the Bracket onto a tripod or laser pole though
5/8"-11 female thread on the bracket.
Work with screws, nails, raceways
Mount the bracket through screw mounting hole on
the back of the bracket to screws, nails, raceways or
optional straps.
To Next Page
Loading...