SAFETY AND GENERAL INFORMATION
This product should be used only in accordance with the specifications listed in this manual to
avoid any injury. Carefully read all instructions before using this product.
•
•
•
•
•
•
•
•
•
•
When using electrical appliances, basic precautions should always be followed to reduce the risk of
fire, electric shock and injury to persons. This includes the following:
OPERATING INSTRUCTIONS
BEFORE OPERATING THE UNIT:
HOW TO OPERATE:
Drawing 2
Insert the micro USB cord to the input port of the fan. Plug in the power adaptor to the AC power
supply or use any USB 5V port with a minimum ampere rating of 1A.
1. Fully charge the product before use. Read “HOW TO CHARGE”.
Charge the product according to the power source’s specified rated voltage.
Keep the cords away from traffic areas. To avoid fire or shock hazard, never place the cord near
combustible materials: near stoves and/or heaters.
Do not insert any objects such as sticks, metals or any other foreign materials in between the grilles
as it may cause short circuits or may damage the unit.
Always unplug the unit when moving it, opening the grille, cleaning, or whenever the unit is not in
use. Make sure to pull by the plug and not by the cord.
Do not operate an
y appliance with a damaged cord or plug. If the motor fails, and the unit
malfunctions call our Customer Service hotline for assistance.
Never block the air openings, grilles or outlets.
Do not place the unit on a soft surface such as a bed or sofa as this may cause the unit to tip over.
Children should be properly supervised to ensure that they do not play with the appliance.
This appliance is not intended for use by persons (including children) with reduced
physical sensory or mental capabilit
ies, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a safety hazard.
This is for indoor use only. Do not immerse in water or other liquids or use near water.
2. Turn OFF the product during storage. Periodically charge the product at least for 4 hours every three
months when stored.
3. Keep out of water or rain. This product is designed for indoor use only.
4. Should the product malfunction, seek only the help of a qualified technician for the repair.
4
3. Change the angle of the fan as you can see in Drawing 2.
4. If the charge indicator is in red, it means the product is charging.
If the red indicator is flickering, it means the product is in low power.
1st Press - LED brightness is in high setting.
If the charge indicator is in green, it means the product
is full
y charged.
1. Press the LED Switch to control the night light.
2nd Press - LED brightness shifts to low setting.
3rd Press - LED turns off.
1st Press - The fan is in low speed.
2. Press the FAN Switch to control the fan.
2nd Press - The fan is in medium speed.
3rd Press - The fan is in high speed.
4th Press - The fan turns off.
To Next Page
Loading...