Need help?Do you have a question about the Firefly GoTo and is the answer not in the manual?
General| Category | Car Seat |
|---|---|
| Brand | Firefly |
| Model | GoTo |
| Recline Positions | Multiple |
| Harness Type | 5-point harness |
| Installation Method | Seatbelt |
Describes using the GoTo Seat attached to a hard back chair for dining.
Explains using the GoTo Seat in a shopping trolley for convenience.
Details using the GoTo Seat in a cradle-style swing, with specific safety conditions.
Mentions using the GoTo Seat with the Floorsitter accessory.
Explains using the GoTo Seat in a pushchair for mobility.
Covers reading instructions, user supervision, assessing stability, and securing the seat.
Highlights limitations like no crash testing and warnings for trolley use on slopes or in swings.
Specifies floorsitter attachment, angle adjustment, and surface placement requirements.
Warns about choking hazards from components and prohibits product modification.
Advises on proper storage, avoiding heat sources, and contacting customer services for doubts.
Instructions for cleaning the plastic seat base using warm water and mild detergent.
Guidelines for cleaning upholstery and fabrics, including vacuuming and damp wiping.
Details on removing, machine washing, and drying seat covers.
Emphasizes prompt spill cleanup and methods for stubborn stains using specific agents.
Instructions for cleaning the floorsitter base unit, including particle removal and salt water rinsing.
Prohibits ironing, bleaching, using solvents, and immersing parts in water.
General advice on securely placing a child into the GoTo Seat and harness.
Guides for inserting child's legs and arms into trolley and removing child from trolley.
Specifies using the Floorsitter on firm, solid flat surfaces, cautioning against soft surfaces.
Details securing child in harness, adjusting straps, and groin strap fitting.
Checks for harness, upholstery, buckles, knobs, and base security before each use.
Ensures floorsitter attachment and connections are secure and free from wear.
Advises contacting customer services for doubts about safe use or part failure.
Emphasizes cleaning for infection control and supplying a user manual.
Advises contacting customer services for doubts about safe use or part failure of reissued products.
Step-by-step guide on aligning, adjusting, and securing the lateral support.
GoTo Seat arrives with lateral support aligned to the body.
Loosen knob to rotate lateral support anticlockwise and secure by tightening.
Turn GoTo over and clip lateral support straps into the central buckle.
Ensuring the floorsitter is placed on a firm, solid, static surface with rubber feet in contact.
Setting the floorsitter recline arm to its highest position.
Step-by-step guide for securely attaching the GoTo Seat to a hardback chair.
Ensure straps are loose, then fasten A, B around the chair back and C underneath.
Pull straps to tighten securely, then tidy excess into clips.
Ensure straps are fastened and the five-point buckle is unfastened before placing the child.
Ensure shoulder, lateral, and groin straps are loose and unfastened.
Attach lateral fastenings, then adjust and tighten all harness straps.
Explains adjusting the groin strap mounting location for Size 2.
Unscrew knob to remove headrest, move up/down, then screw knob back to secure.
Detach lateral support, move up/down, then secure by turning knob clockwise.
Thread straps A through trolley seat grid and fasten; thread B through loop and tighten.
Fasten straps C underneath trolley seat and tidy excess into clips.
Ensure trolley seat is secure with five-point buckle open and straps loose.
Lower the GoTo Seat with its base flat onto the floorsitter.
Align seat base centrally, move forward into locking channel, listen for click.
Ensure recline arm is at its highest setting before attaching to the backrest.
Push button and slot attachment into backrest, listen for audible click.
Describes upright for good control, mid for lifting, and full for minimal head control.
Exercise caution when altering recline angle for a smooth movement.
Place hand on backrest and clip on recline arm to move seat to upright.
Fasten the clip on the floorsitter; an audible click confirms engagement.
Press button to release back rest, pull tab to release seat base, then lift GoTo off.
Detailed steps for removing the headrest from the GoTo Seat base.
Unscrew knob, unbutton upholstery, slide inner down, and detach headrest from base.
Detach lateral support, remove from backrest, secure knob, and loosen straps.
Pull plastic insert out of cover, feed buckle through holes and upholstery.
Thread strap buckles through upholstery and base holes to remove them.
Remove the insert from the upholstery; undo Velcro for Size 1 at the seat base.
Steps for reattaching straps and placing the insert into the upholstery.
Retrieve, thread, and reinsert straps and upholstery insert.
Loosen straps, align components, insert, pull strap through, and thread for comfort.
Insert strap buckles, slide headrest into upholstery, and attach to base by screwing knob.
Provides seat base dimensions, lateral support widths, and seat depth.
Indicates maximum weight capacity and approximate age range for each size.
Wipe with damp cloth, soak spills promptly, use mild soap for soiling.
Notes on potential stains from dyes/pens, heat effects, solvent prohibition, and no immersion.
Remove immediately with cold water and approved infection control protocols.
To Next Page
