Firefly GottaGo - Page 15

GottaGo User Manual p15
When your frame is set up
following the instructions in section
10:1 and 10:2, you can place the
GottaGo seat in the frame. The
ratchet
A
and ratchet straps straps
B
rstly need to be secured.
To do this, feed the ratchet strap
B
through the ratchet
A
. You will
know the connection has been
made when you hear audible clicks
as the ratchet strap
B
is pushed
through the ratchet
A
.
Set the seat to the side for now
while you prepare the frame.
11.3 Attaching the GottaGo seat
to the frame
To adjust to disabled toilet height:
With the GottaGo frame set
upright, hold in the front buttons
B
simultaneously and gently begin
lifting the GottaGo frame upwards.
This will allow the legs to drop down
to the fully extended height
3
. You
will hear an audible click. Repeat
this for rear legs.
Ensure each of the legs is set to an
even level as identiable through
the green numbered indicators.
Return safety lock to engaged
position by quarter turning and
pushing inwards.
3