p16 GottaGo User Manual
On the main grey frame unlock the
frame connectors
C
on either side by
pulling upwards.
Attach the GottaGo seat to the frame
by aligning the seat connectors
D
over
the receiving groove
E
. The groove
E
has visual indicators which will help you
align the seat connectors to the frame
symmetrically. Push the seat connectors
D
into the receiving groove
E
and then
lock the seat to frame connectors
C
by
pushing down on them. You will hear an
audible snap to indicate they are locked.
To Next Page
Loading...