9
Warning
Maintain a flying altitude above one meter
Introduction of the corresponding socket of receiver
Gyro calibration method
1. When flying yaw, first land and calibrate the gyroscope.
2. When calibrating the gyroscope, the aircraft must be
placed on a level ground.
3. The indicator light will flash quickly during the calibration process,
the indicator light stops flashing to take off.
9
陀螺仪校准方式
接收机对应插座介绍
1.当飞行偏航时，可以先尝试先将飞机降落校准陀螺仪。
2.校准陀螺仪时需将飞机放置水平地面不能偏斜。
3.当校准时指示灯快速闪烁，校准完成指示灯常亮，然后再起飞。
修正飞机偏航时注意事项
保持1米以上高度
Trimming Notes
To Next Page
Loading...