EasyManua.ls Logo

FireFriend DF-6502 - STORAGE; Product and Fuel Storage; TROUBLESHOOTING; Common Issues and Solutions

FireFriend DF-6502
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
• Use a soft, slightly wetted cloth and if applicable, a small amount of mild
cleaner to clean the surfaces of the product and its accessories.
• Use warm water and a small amount of detergent to clean the burner
regularly.
• After cleaning, ensure that all parts are dry before using it again or
storing it.
STORAGE
• If you want to store the product, make sure that the product and
its accessories have cooled down and the Bio-Ethanol is used up
completely. If the Bio-Ethanol isn’t used up completely, dispose of the
Bio-Ethanol at a collection point for hazardous substances.
• This product is to be stored in a clean, dry environment.
• Always store the Bio-Ethanol in a sealed and designated container.
• As the Bio-Ethanol is high ammability, the place of storage must
be cool, not exposed to direct sunlight, and away from intense heat
sources or open ames. Do not store quantities above 5 liters of Bio-
Ethanol in your home.
TROUBLESHOOTING
Problem Potential cause and solution
The Bio-Ethanol won’t ignite It is possible the Bio-Ethanol in the
burner won’t ignite after several
attempts, because a signicant
portion of the alcohol is already
evaporated, reducing the Bio-
Ethanol’s ignitability. In this case,
please wait for a few minutes and
then dispose of the Bio-Ethanol,
which is still in the burner.
In the case of re Despite all safety precautions, if a
re breaks out, you could use an
alcohol resistant foam or carbon
dioxide as extinguishing agents.
It is necessary that you keep an
adequate extinguisher at close
hand to the re.
EN

Other manuals for FireFriend DF-6502

Related product manuals