2 Introduction
© Travis Industries 4161018 100-01436
Overview
This manual details the installation requirements for the 42 Apex wood-burning fireplace. For operating
and maintenance instructions, refer to the 42 Apex Owner's Manual.
Keep this manual for future use.
Listing Details
This appliance was listed by OMNI Test Labs to U.L. 127 and ULC-S610-M87 – report number
028WF102S. The listing label is attached to the base of the fireplace and can be viewed by accessing the
fan compartment.
DO NOT REMOVE THIS LABEL
CONTACT LOCAL BUILDING OR FIRE OFFICIALS ABOUT INSTALLATION AND
RESTRICTIONS IN YOUR AREA. LISTED FACTORY-BUILT FIREPLACE
Report No. 028WF102S
Certified for USA and Canada
Tested and
Listed by
®
MODEL:
42 Apex
SERIAL NO:
CONFORMS TO UL STD 127-2015; CERTIFIED TO ULC STD S610-M87 (R1998)
This wood heater needs periodic inspection and repair for proper operation. Consult the owner’s manual for further information. It is against federal regulations to operate this wood heater in a manner
inconsistent with operating instructions in the owner’s manual or if the catalytic element is deactivated or removed. CAUTION: the combustor used in this appliance (part no. 250-00556) is fragile and must
be handled carefully. Burning of metal foils, plastic, garbage, sulphur and diesel oil will render the catalyst in the combustor inactive. The performance and durability of the catalytic combustor has not
been evaluated as part of the certification. Do not use a fireplace insert or other products not specified for use with this product. This fireplace has not been tested with an unvented gas log set. To reduce
the risk of fire or injury, do not install an unvented gas log set into fireplace. Fireplace must use combustion air drawn from outside the house. Use cord wood only. DO NOT OVERFIRE UNIT.
See Installation Manual for approved chimneys
Replace glass only with 5mm neoceramic or
ceramic glass.
Electrical Rating: 115V., 60 Hz, 1.8 Amps
Optional Green Start: # 94400954
Blower: # 250-04176
TRAVIS INDUSTRIES, INC.
12521 Harbour Reach Drive
Mukilteo, WA 98275
Manufactured by:
www.travisproducts.com
U.S. ENVIRONMENTAL PROTECTION AGENCY
Certified to comply with 2015 particulate emission standards. Not approved for sale after May 15, 2020.
0.7 g/h, Method 28, 5G2, 2015
Made in U.S.A.
2017 2018 2019 2020 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
DATE OF MANUFACTURE
1212
®
42 Apex
Serial
No.
ZC-1203
MANUFACTURE DATE:
2017
2018
2016
FEB
MAR
JAN
MAY
JUN
APR
AUG
SEP
JUL
NOV
DEC
OCT
U.S. ENVIRONMENTAL PROTECTION AGENCY
Certified to comply with 2015 particulate emission standards. Not approved for sale after May 15, 2020.
0.7 g/h, Method 28, 5G2, 2015
This wood heater contains a catalytic combustor which needs periodic inspection and replacement for proper operation.
Consult the owner’s manual for further information. It is against federal regulations to operate this wood heater in a manner
inconsistent with operating instructions in the owner’s manual or if the catalytic element is deactivated or removed. See
installation and operating instructions for this model. Use cord woood only.
Manufactured By: TRAVIS INDUSTRIES, INC.
12521 Harbour Reach Drive, Mukilteo, WA 98275
XXXX
IAS (ICBO) Approval
This appliance was listed by OMNI Test Labs – IAS (ICBO) # TL-130.
EPA Approval
This heater meets the 2015 U.S. EPA’s crib wood emission limits for wood heaters sold after May 15,
2015. Tested to Method 28, 5G2 this heater has been shown to deliver 11,000 to 38,000 BTUs/hr and an
emission value of .69 g/h.
This wood heater has a manufacturer-set minimum low burn rate that must not be altered. It is against
federal regulations to alter this setting or otherwise operate this wood heater in a manner inconsistent
with operating instructions in this manual.
National Fireplace Institute
To Next Page
Loading...