English Customer Service: 1-844-FIRMAN1
30
Maintenance - Storage
Battery Replacement
1.Unscrew the air cleaner cover by provided screwdriver.
2. Release the battery retaining rubber belt.
3. Disconnect the black(-) cable from black(-) terminal on the battery.
Disconnect the red(+) cable from red(+) terminal on the battery.
Rubber Sheath
Battery
Positive(+)
Terminal
Negative(-)
Terminal
4. Remove the battery and recycle and dispose of properly.
5. Install the new battery with following specification:
12V lithium battery 1.6AH
LXWXH:4.21X2.2X3.34 in. (107X56X85mm)
6.Connect the red(+)battery cable to the positive terminal of battery first and then connect the black(-)
battery cable to the negative terminal of battery.
7. Reattach the air cleaner cover.
Red Cable
Black Cable
Battery Charging (USB-C )
The battery powers the starter motor and control module. This portable generator is equipped with
an automatic battery charging circuit. The battery will receive charging voltage only when the engine
is running. The battery will maintain a proper charge if the portable generator is used on a regular
basis (about once every two weeks). If it is used less frequently, the battery should be connected
to a trickle charger (not included) or battery maintainer (not included) to keep the battery properly
charged. If the battery is not able to start the engine, the battery must be connected to a type-C
style battery charger for re-charging before it can be used.
USB-C charging input supports 5V3A input 15W maximum.
Red Cable
Black Cable
To Next Page
Loading...
