First Alert 1037290 - Safe Care & Maintenance; Consumer Affairs; Safe Identification Record

109
Safe Care and Maintenance / Consumer Aairs Safe Identication Record
SAFE CARE & MAINTENANCE
When properly maintained, your safe will continue to operate accurately for
many years. In order to ensure optimum performance of your safe, please follow
these simple precautions:
Battery Maintenance
1
Always purchase and use the batteries as specied by this User’s manual.
2
Always replace all batteries at the same time. It is recommended to replace
all batteries at least once a year or sooner depending on amount of use.
3
Always clean the battery contacts in the battery compartment and on the
batteries before installing new batteries.
4
Always make sure all batteries match the polarity (+ and -) signs in the open
battery compartment.
5
If your safe will not be used for an extended period of time, it is
recommended that you remove the batteries.
6
Always promptly remove and properly discard of all used batteries.
DO NOT MIX OLD AND NEW BATTERIES
DO NOT MIX ALKALINE, STANDARD, OR RECHARGEABLE BATTERIES
Clean Hands - Never attempt to operate the digital keypad if your hands have
excessive dirt, debris or liquids on them.
Clean Safe – To clean the surface of your safe, it is recommended that you use a
mild cleaner (e.g., window cleaner) to avoid scratching or discoloring the surface.
Always wipe dry and NEVER use abrasive cleansers on the safe or digital keypad.
CONSUMER AFFAIRS
YOUR SAFE’S UNIQUE IDENTIFICATION NUMBERS
When contacting Consumer Aairs, you should be prepared to supply some
important information that specically identies your safe. This information is
extremely important to assuring prompt and accurate assistance.
It is strongly recommended that you identify and record the following
information in the Safe Identication Record form located on page 8
MODEL NUMBER KEY NUMBER
MODEL NUMBER
The First Alert
®
Safes product line consists of many dierent models, each
identied by a specic Model number. Every model is manufactured with unique
capabilities and features that may require specic solutions to a variety of
diculties that occasionally occur.
KEY NUMBER
The Key Number is necessary to identify the specic conguration of the key and
lock cylinder components of your safe. If a key becomes damaged or misplaced,
the Key Number is required in order for you to receive a replacement key.
LOCATING KEY NUMBER
The Key Number is engraved on the keys and around the lock cylinder.
HOW TO OBTAIN WARRANTY SERVICE
If service is required, do not return the product to your retailer. In order to obtain
warranty service, contact Consumer Aairs at 1-800-323-9005. To assist us in
serving you, please have the model number and date of purchase
available when calling.
If you have any questions pertaining to proper use,
DO NOT RETURN safe to the store.
Please contact Consumer Aairs at 1-800-323-9005.
IMPORTANT: DO NOT RETURN SAFE TO STORE
SAFE IDENTIFICATION RECORD
Model Number
Key Number
Digital Passcode Record
Serial Number
!
LOW BATTERY INDICATOR
Every time the keypad is activated, the system automatically checks the power
level remaining in the batteries. If the power falls below a certain level, the
keypad will beep and ash yellow when a key is pressed.