EasyManuals Logo

First Alert ReadyGuard Plus User Manual

First Alert ReadyGuard Plus
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
– 17 –
SECURING THE PREMISES
SECURING THE PREMISESSECURING THE PREMISES
SECURING THE PREMISES
Arming the System
Arming in Stay Mode
Use this mode when you are staying home, but expect someone to use the entrance door later. Close all
protected perimeter windows and doors before arming. The green READY indicator on the keypad
should be lit if the system is ready to be armed.
To arm in STAY mode:
+ STAY
or press and hold
STAY
**
Your User code**
** See Quick Arming paragraph.
The keypad beeps three times and displays the Armed Stay message. The red ARMED indicator
lights and the system announces armed STAYexit now.
When armed in STAY mode, the system will sound an alarm if a protected door or window is opened,
but you may otherwise move freely throughout the premises. Late arrivals can enter through the
entrance door without causing an alarm, but they must disarm the system within the entry delay
period or an alarm will occur.
Restarting Exit Delay While System Armed
Ask your installer if this feature is active for your system. If active, you can restart the exit delay at
any time after arming in STAY mode by entering the User Code and pressing the STAY key, or simply
by pressing the STAY key by itself. This avoids having the user disarm then re-arm the system after
allowing someone to enter or exit.
To restart exit delay while system is armed in STAY mode: Press STAY
key.
Arming In Away Mode
Use this mode when no one will be staying on the premises. Close all protected perimeter windows and
doors before arming. The green READY indicator on the keypad should be lit if the system is ready to
be armed.
To arm in AWAY mode:
+ AWAY
or press and hold
AWAY
**
Your User Code **
** See Quick Arming paragraph.
The keypad beeps twice, or beeps continuously if exit warning has been programmed for your system,
and displays the Armed Away message. The red ARMED indicator lights and the system announces
armed AWAYexit now.
When armed in AWAY mode, the system will sound an alarm if a protected door or window is opened,
or if any movement is detected inside the premises. You may leave through the entrance door during
the exit delay period without causing an alarm. You may also re-enter through the entrance door, but
you must disarm the system within the entry delay period or an alarm will occur.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the First Alert ReadyGuard Plus and is the answer not in the manual?

First Alert ReadyGuard Plus Specifications

General IconGeneral
BrandFirst Alert
ModelReadyGuard Plus
CategorySecurity System
LanguageEnglish

Related product manuals