1. Put the sealing ring on the inner edge of the blade
unit.
2. Put the blade unit with sealing ring into the cup
base.
3. Mount the glass cup onto the cup base unit and
tune the cup base unit in clockwise direction until
4. Mount the cup with cup unit onto the base unit.
onto the cup by pressing down.
6. Insert the inner cover into the opening of the lid,
and tune it in clockwise direction until it is locked.
CAUTION: NEVER TURN ON THE APPLIANCE
clean the parts which will contact food directly.
2. If you want to stir, rotate the knob to ON and
press SMOOTHIE button. It will work 3 seconds
and stop 1.5 seconds. After 3 cycles, keep on
3. If you want to crush ice, rotate the knob to ON and
press ICE CRUSH button. It will work 3 seconds
and stop 1.5 seconds. After 10 cycles stop
4. PULSE Button: as long this button is pushed the
unit keeps running on high speed.
NOTE: MAKE SURE THE MACHINE IS OFF
AND PLUG IS DISCONNECTED FROM OUTLET
BEFORE PUTTING ON OR TAKING OFF ANY
PARTS.
2. Particles of food lodging under the blade can be
(not attached accessory).
WARNING: THE BLADE IS EXTREMELY SHARP.
HANDLE CAREFULLY.
Do not use abrasive cleaners or scouring pads to
4. Rinse parts under running water. Do not use
a dishwasher or very hot water. Wipe all parts
use. Store the appliance in a dry place. It is
CAUTION: NEVER IMMERSE THE MOTOR UNIT
are no user serviceable parts inside. Contact only the
TECHNICAL DATA:
Environment friendly disposal
appropriate waste disposal center.
INSTRUCTION MANUAL
The following basic safety precautions apply when
using electrical appliances:
correspond to the one shown on the rating plate.
Return appliance to the nearest authorized
appliance is used by or near children.
counter.
stove.
is not running.
attached.
Warning:
persons (including children) with reduced
been given supervision or instruction concerning
use of the appliance by a person responsible for
their safety.
do not play with the appliance.
supply plug and wait for it to cool (about 20 to 30
SAVE THESE INSTRUCTIONS!
HOW TO USE THE BLENDER
thoroughly.
ASSEMBLE:
1. Inner cover
2. Lid
3.
4. Cutting blade
5. Cup Sealing
6. Cup base
7. Motor block
To Next Page
Loading...